Operators manual, Gd30i, 6 programming – Watson-Marlow GD30I User Manual
Page 10

OPERATORS MANUAL
Machine Type:
GD30I
GD30I OM 1.01 EN
Ver 1.01
Date 24-08-2006
Page 10 of 15
6 PROGRAMMING
6.1 Programming
principle
In the following, a parameter will be the value of a single function, e.g. volume, or acceleration.
A program will be a complete set of parameters which together will constitute the GD30I work
instructions.
The actual programming will be made on the MC12 and reference is made to the MC12 manual.
6.2 GD30I
parameters
1. Volume
Value: ml
Range: 10 - 9999 ml
GD30I can dispense from 10 to 9999 ml, but for volumes exceeding approx. 1000 ml, the capacity
will drop significantly.
If the volume is changed, a recalibration should be made.
2. Velocity:
Range: 30-750 rpm
The velocity must be adjusted to the viscosity of the product, and Fig. 6.1 gives a guideline for this.
Fig. 6.1
In case of large velocity changes or big changes in the dispense volume a recalibration should be
carried out.
- 323Dz (53 pages)
- 620SN (100 pages)
- Bredel 25 (76 pages)
- APEX35 (72 pages)
- Bredel 80 (76 pages)
- Bredel 15 (68 pages)
- 520Bp (107 pages)
- 323D (48 pages)
- EBU250 (8 pages)
- FF20 (24 pages)
- MR-Series (52 pages)
- GD30P (14 pages)
- EC 60 (28 pages)
- PetroProof Series (49 pages)
- Qdos30 Universal (40 pages)
- Qdos60 Universal 110V Logic (78 pages)
- 120S/DM3 (36 pages)
- 120F/DV (26 pages)
- SP50 (86 pages)
- 101U (14 pages)
- 505BA (21 pages)
- 700 series (11 pages)
- Qdos60 Profibus (66 pages)
- 521CC (47 pages)
- 401U (12 pages)
- 620RE4A (11 pages)
- 405U (13 pages)
- 624S (46 pages)
- Bredel 2100 (96 pages)
- Bredel 2100 (92 pages)
- 701 (25 pages)
- 840 (13 pages)
- 505LGA (11 pages)
- 620RE4 (19 pages)
- 205U (13 pages)
- SPS (142 pages)
- 505U (19 pages)
- 704S (17 pages)
- 621 Trio (11 pages)
- 313T (16 pages)
- 624Di (37 pages)
- 505Di (39 pages)
- 501CC (17 pages)
- 504Du (31 pages)
- 504Du (30 pages)