Watson-Marlow MR 160 - Manual (Page 7)

N:\Konstruktion\Betriebsanleitungen\AKTUELL\MR Serie\TDE MR160.doc Revision 4 January 13 7
4.15 Constructional changes to the machine
Make no changes, attachments or conversions to the machine without approval of the manufacturer. All conversion measures require a
written confirmation of the MASO company. Immediately replace machine parts in not perfect condition. Use only original spare and
wearing parts. In the case of parts not obtained from MASO it is not guaranteed that they are designed and manufactured in compliance
with load and safety requirements.
4.16 Noise of the machine
The continuous sound pressure level proceeding from the machine is max. 70 dB(A). A higher sound pressure level that causes noise
deafness can arise depending upon the local conditions. In this case protect the operating personnel with corresponding protective
equipment / protective measures.
4.17 Maintenance and repair, troubleshooting
Perform specified adjustment, maintenance and inspection work on time. Inform operating personnel before starting the maintenance
and repair work. Protect all plant parts and operating media connected before and after the machine such as compressed air and
hydraulics and similar against unintentional start-up. In all
maintenance, inspection and repair work switch the machine free of voltage
and secure the main switch against unexpected switching back on. Fasten and secure larger assemblies on
replacement carefully to lifting gear. Check loosened screw connections for firm seating. Use only original spare parts.
After ending the maintenance work check the safety devices for function.
4.18 Cleaning the machine
Handle substances and materials used correctly, especially
-
when working on lubricating systems
- when cleaning with solvents.
4.19 Faults
In the case of operating faults switch off the machine and secure it against unauthorized or inadvertent starting up again.
4.20 Use as intended
The accurate intention is listed in the order confirmation. Another use or use going beyond this is not as intended.
If you want to change the product, the pressure, the speed or the temperature, you must firstly consult us or one of our representatives.
5 Warranty and liability
Basically our “General sales and delivery conditions” apply.
These are available to the operator at the latest since conclusion of the contract.
Warranty and liability claims for personal and material damage are excluded if they are attributable to one or several of the following
causes:
• Use of the machine not as intended
• Incorrect installation, operation and maintenance of the machine
• Operating the machine with defective safety devices or not correctly attached or not functioning safety and protective devices
• Non-compliance with the instructions in the operating instructions regarding
transport,
storage,
installation,
start-up,
operation, maintenance and setting of the machine.
• Unauthorized constructional changes to the machine
• Insufficient monitoring of machine parts subject to wear
• Incorrectly performed repairs
• Cases of catastrophe due to effect of foreign bodies and acts of God.
WATSON-MARLOW GmbH grants no warranty on this documentation as well as no implicit warranties on commercially customary
quality and suitability for a certain application.
WATSON-MARLOW GmbH undertakes no liability for errors contained in it or consequential damage occurring by chance arising due
to the design, performance and the use of this documentation.
This publication contains own information protected by copyright. All rights are reserved.
This publication may be neither photocopied, nor duplicated nor translated without previous agreement of WATSON-MARLOW GmbH .
Rights reserved to make changes in these operating instructions.