Watson-Marlow MR 160 - Manual (Page 12)

N:\Konstruktion\Betriebsanleitungen\AKTUELL\MR Serie\TDE MR160.doc Revision 4 January 13 12
MASO PROCESS-PUMPEN GmbH
Postfach 100
STEINBEISSTR. 3
D-74358 ILSFELD (GERMANY)
TELEFON : (07062) 9560-0
TELEFAX : (07062) 64593
EMail
[email protected]
Internet http://www.maso.de
WATSON-MARLOW GmbH
Postfach 100
STEINBEISSTR. 3
D-74358 ILSFELD (GERMANY)
TELEPHON : +49 7062 9560-0
TELEFAX : +49 7062 64593
EMail
[email protected]
Internet http://www.masosine.de
16 Disposal
Send the old oil for treatment.
17 Spare parts
Basically repairs should be performed only by factory personnel or by customer service agencies authorized by the factory. If you make
repairs yourself, observe the relevant safety regulations and contact the factory customer service before starting the work, especially if
warranty obligations which can be lost by not approved repairs still exist.
Only WATSON-MARLOW-ORIGINAL-SPARE-PARTS may be used.
If you make changes to the equipment, e.g. instead of O-rings made of Perbunan
those from EPDM, or another sealing system, please note this on the maintenance
plan.
Please provide all data when ordering:
- EDP number
- Designation of the part
- Material of the part - The drawing / parts list number
- Quantity - Ask for our express delivery!
18 Taking out of service
18.1 Provisional taking out of service
Short term:
Remove product residues (cleaning) Switch off main switch Clean pump surface
Longer term:
Remove product residues carefully (cleaning ) Switch off main switch Clean pump surface
Disconnect connections
Drain off static purging liquid Loosen purging connections Store the scraper in water.
18.2 Final putting out of service
Separate power and purging liquid supply. Send oils and greases for treatment.
If you send us the remaining parts freight paid, we will dispose of the parts.