Watson-Marlow 401U - Manual (Page 2)

2
Declarations
Declaration of
conformity
Declaration of
Incorporation
Responsible person: Christopher Gadsden, Managing Director, Watson-Marlow Limited, Falmouth, Cornwall
TR11 4RU, England. Telephone +44 (0) 1326 370370. Fax +44 (0) 1326 376009.
Two year warranty
Watson-Marlow Limited warrants, subject to the conditions below, through either Watson-Marlow Limited, its
subsidiaries, or its authorised distributors, to repair or replace free of charge, including labour, any part of this
product which fails within two years of delivery of the product to the end user. Such failure must have
occurred because of defect in material or workmanship and not as a result of operation of the product other
than in accordance with the instructions given in this manual.
Conditions of and specific exceptions to the above warranty are
• Consumable items such as tubing, rollers and motor brushes are excluded.
• Products must be returned by pre-arrangement carriage paid to Watson-Marlow Limited, its subsidiaries,
or its authorised distributor.
• All repairs or modifications must have been made by Watson-Marlow Limited, its subsidiaries, or its
authorised distributors or with the express permission of Watson-Marlow Limited, its subsidiaries, or its
authorised distributors.
• Products which have been abused, misused, or subjected to malicious or accidental damage or
electrical surge are excluded.
Warranties purporting to be on behalf of Watson-Marlow Limited made by any person, including representatives
of Watson-Marlow Limited, its subsidiaries, or its distributors, which do not accord with the terms of this
warranty shall not be binding upon Watson-Marlow Limited unless expressly approved in writing by a
director or manager of Watson-Marlow Limited.
Information for returning pumps
Equipment which has been contaminated with, or exposed to, body fluids, toxic chemicals or any other
substance hazardous to health must be decontaminated before it is returned to Watson-Marlow Limited or
its distributor.
A certificate included at the rear of these operating instructions, or signed statement, must be attached to the
outside of the shipping carton.
This certificate is required even if the pump is unused. If the pump has been used, the fluids that have been
in contact with the pump and the cleaning procedure must be specified along with a statement that the
equipment has been decontaminated.
When this pump unit is used as a stand alone pump it complies with: Machinery
Directive 2006/42/EC, EMC Directive 2004/108/EC.
When this pump unit is to be installed into a machine or is to be assembled with other
machines for installations, it must not be put into service until the relevant machinery
has been declared in conformity with the Machinery Directive 2006/42/EC.