Watson-Marlow GD30P - Manual (Page 7)

OPERATORS MANUAL Machine Type: GD30P
GD30P OM 1.01 EN Ver 1.01 Date 2006-10-24 Page 7 of 14
3.4 Addressing of filling station
Fig. 2
Address "1" is the factory setting of GD30P.
If the GD30P is one of several filling stations in a system, none of the stations may have
the same address and it must therefore be changed.
Change of address is performed via a dip-switch placed at the bottom of the GD30P. This
change may only be carried out when the machine is turned off at the main switch.
Addresses between 1 and 16 may be chosen, and Fig. 2 shows the various combinations.