Vuzix Wrap 920 VR Bundle - Manual (Page 10)

To install the Wrap Earphones:

Plug an earphone into each of the audio ports on either side of the
display module. Either earphone can be used on the left or right.
To use the eyewear without the earphones:

Unplug the earphones from your Wrap eyewear and control volume
using the audio controls provided on your media source.
Wrap Tracker 6TC
Wrap video eyewear can be used with out without the Tracker installed and the
Tracker works only with supporting applications.
To install the Tracker:

Plug your Wrap Tracker 6TC into the small oblong port located between
the right temple hinge and the right earphone port on the back of the
display module.
Note: Although the Tracker connector looks much like a UBS micro-B port, it is not. Do not
attempt to connect a USB micro-B connector into this port and do not attach the Wrap
Tracker 6TC to a USB micro-B cable or device.
Nose Bridge
Your Wrap 920 nose bridge is both adjustable and replaceable. The nose bridge
stems slides in and out and its malleable wire arms, like those on standard eyeglasses,
adjust to almost any width and angle for broad fit requirements and comfort.