Vuzix Wrap 1200AR User Guide - Manual (Page 16)

System Preparation & Configuration
Your computer system may require some preparation before you install the software.
Tip: Following these few simple precaution will minimize the risk of conflicts and the time and
frustration required to find a resolution.
§
If you have any 3rd party stereoscopic display drivers installed, uninstall or
disable them before proceeding.
§ If your system has a prior version of VR Manager software installed, uninstall it
before proceeding.
§ If you have a Vuzix SDK installed, uninstall it before proceeding. You can
reinstall the latest version after this installation has been completed.
§
If you plan to use the maxReality software, you’ll need to install Autodesk 3ds
Max (32-bit). We suggest installing 3ds Max prior to installing maxReality. The
maxReality and 3ds Max installations can be done at any time, at your
convenience.
Tip: If you wish to try maxReality but don’t have 3ds Max, you can download and use a trial version
from the Autodesk website.
Note: Your Wrap eyewear, VGA Controller and stereo camera pair must be connected to your computer
before proceeding with the software installation. Some drivers will not install if they are unable
to find the appropriate hardware connected.
Software Installation
The Wrap 1200AR software package is provided as a Digital Download, available
from the Vuzix website at:
www.vuzix.com/DD