Vinpower Digital Xerox Standard - Manual (Page 42)

Xerox Duplicator 42
How to Change the Setup Settings
Most of the internal settings and information is stored inside the Setup
menu. To explore and modify them is simple. Following is an example of
how to modify the Auto Start setting. Note that the default setup is set for
optimal performance of the duplicator; it is unnecessary to change if you
are satisfied with the outcome.
Step 1: Use the up or down arrow button to navigate to the following
screen.
Step 2: Press >> to enter Setup menu and you should see the following
screen.
Step 3: Use the up or down arrow button to navigate to the following
screen.
Step 4: Press >> to enter Auto Start Setting menu and you should see
the following screen.
Step 5: Use the up or down arrow button to modify the setting to Full
and then press >> to submit your selection. You should see the following
screen.
Step 6: If you would like to modify more settings, then go back to Step
3. Otherwise, press << button to bring you back to the Main menu.
XEROX 2.14
12. Setup
Setup
1. Language
Setup
2. Auto Start
Auto Start
Auto
Setup
2. Auto Start