Vinpower Digital Xerox Standard - Manual (Page 29)

29 Xerox Duplicator
How to make a Copy from the Hard Drive
NOTE: In this tutorial, the term partition(s) is also used to
refer to image files in the hard drive.
Step 1: Make sure the master Reading Source is set to hard drive.
It is very important to make sure the master Reading Source is set to the
hard drive in order to avoid unnecessary error messages. To check the mas-
ter Reading Source, use the up or down arrow button to navigate to the fol-
lowing screen.
Step 2: Press >> to enter the Select Source menu and you should see the
following screen.
Make sure it is located at the hard drive. If not, you need to press the up or
down navigation button to search for it.
Step 3: Press >> to submit your selection. After your selection has been
submitted, you should see the following screen.
Step 4: Go back to the Copy menu.
Use up or down arrow button to navigate to the following screen.
Step 5: Start the Copying Process
Insert your blank discs into the writer trays (make sure the Reader tray is
empty) and press >> button to enter Copy menu. You will be asked to
choose which hard drive partition to copy from.
XEROX 2.14
8.Select Source
Hard Drive Port 0.0
HITACHI HDS721616PL
XEROX 2.14
8.Select Source
XEROX 2.14
1. Copy