Vinpower Digital SharkCopier Series - Manual (Page 23)

- 20 -
Depending on the type of duplication job(s) and your system restrictions, you need to
select the correct speed type in order for this setting to take effect. To select various
speed types, you need to press the Up or Down button to adjust and press the
ENT/Enter button to submit your selection.
Step 4: Once you have submitted the desired speed types, you should see the following
screen for speed adjustment.
You can press the up or down button to select the desired speed value and then press the
ENT/Enter to submit the selection.
If the speed value you’ve selected is the same as the current speed value, the
system will NOT respond to the ENT/Enter button. Please press the ESC/Escape
button to go back to the main menu.
Step 5: Once the speed setting has been successfully changed, you shall see the following
screen for 2 seconds.
Then you will be directed back to the main menu:
CD to CD Speed:
16x
CD to CD Speed:
Adjusted to: 24x
DUPLICATOR 3.37
7.Select Burn Speed