Vinpower Digital SharkCopier Series - Manual (Page 17)

- 14 -
From 1 of the 3 choices above, press the ENT/Enter button to submit your selection.

If you have chosen to create a new partition/image, you should see the following screen
after you submit your selection.
Please refer to the “Input Name and Number” section of “Chapter 2: Getting to know
your System” to enter the desired title. Then press the ENT/Enter to continue to the next
step.
After you submitted a hard drive partition/image name, the system will
automatically append a partition/image name suffix of .VEF.

If you have chosen to overwrite one of the existing partitions/images, you should see the
following screen after you submit your selection.
Then press ENT/Enter to continue to the next step.
 If you have chosen Auto Generate, Then precede to the next step.
Step 5: Please place your master disc into the Reader or the 1 st Writer if there’s no Reader
installed in your system. Once the system recognizes your master disc, the loading
progress screen will be displayed, as show below:
Step 6: Once the loading process is completed, you should see the following screen:
 4012MB indicates the total capacity of your
master disc.
 FUN1.VEF indicates the name of the
partition/image where the data is being loaded
into.
 10% indicates the current percentage of the
master disc that has been loaded into the hard
drive.
 401MB indicates the current amount data from
the master disc that has been loaded into the
hard drive.
Edit Partition Name
[ ]OK?
This Will Overwrite
[FUN1.VEF ]OK?
Loading... 4012MB
FUN1.VEF 10% 401MB
Load Partition OK!
Press OK to Continue