Verilink SNMP Management (No Part Number) Product Manual - Manual (Page 10)

SNMP Management
SNMP-10
Verilink SNMP
Table 10 Far End Group3
DS1 Fractional Group parameters are not supported in this release.
dsx1FarEndIntervalUASs The number of Far End Unavailable Seconds in one
of the previous 96 15-minute intervals.
dsx1FarEndIntervalCSSs 0 (Not supported).
dsx1FarEndIntervalLESs The number of Far End ES-L in one of the previous
96 15-minute intervals.
dsx1FarEndIntervalPCVs 0 (Not supported).
dsx1FarEndIntervalBESs The number of Far End Bursty Errored Seconds in
one of the previous 96 15-minute intervals.
dsx1FarEndIntervalDM 0 (Not supported).
Object-Type Parameters
dsx1FarEndTotalIndex A number calculated with the formula in Calculating
the
SNMP ifIndex
, on page 2.
dsx1FarEndTotalESs The number of Far End Errored Seconds in the
previous 24-hour interval.
dsx1FarEndTotalSESs The number of Far End Severely Errored Seconds in
the previous 24-hour interval.
dsx1FarEndTotalSEFSs The number of Far End Severely Errored Framing
Seconds in the previous 24-hour interval. For
equipment previous to FFF, this is always 0 (Not
supported).
dsx1FarEndTotalUASs The number of Far End Unavailable Seconds in the
previous 24-hour interval.
dsx1FarEndTotalCSSs 0 (Not supported).
dsx1FarEndTotalLESs The number of Far End ES-L in the previous 24-hour
interval. For equipment previous to FFF, this is
always 0 (Not supported).
dsx1FarEndTotalPCVs 0 (Not supported).
dsx1FarEndTotalBESs The number of Far End Bursty Errored Seconds in the
previous 24-hour interval.
dsx1FarEndTotalDM 0 (Not supported).
Object-Type Parameters