Venstar T1700 - Manual (Page 52)

Page 13.1
SECTION 13
Accessories
13
RJ11 Type Jack
The Accessory Port is located on
the bottom of the thermostat.
EZ PROGRAMMER (optional accessory) - When the EZ
mer is connected, the thermostat Time Period Programming and
Advanced Setup Programming can be stored into the EZ
Programmer’s memory. This information can then be uploaded
to other T1700 thermostats. For more information see the
manual for the (ACC0432).
Program-
COMFORT CALL (optional accessory) - When Comfort call is connected,
the thermostat’s Heating and cooling functionality may be accessed
and controlled through the phone. For more information see the
manual for Comfort Call (ACC0433).
IR RECEIVER / REMOTE CONTROL (optional accessory) - When the
IR Receiver is connected, the thermostat can be controlled using
an IR Remote Control. The thermostat may also interface with
other wireless systems in your home. For more information see the
manual for the IR Receiver (ACC0431).
ACCESSORY PORT - The RJ11 Jack is used to connect the
T1700 to the IR Receiver (ACC0431) for wireless communication
or the EZ Programmer (ACC0432) for easy downloading or
uploading of thermostat information.