D-Link DSL-G684T - Manual (Page 56)

DSL-G684T Wireless ADSL Router User Guide
ATM VC Settings
ATM VC settings can be configured for all connection types in the WAN configuration window of the Home directory.
ATM VC Settings in WAN Settings window
The table below describes the ATM VC settings used to configure a PPPoE or PPPoA connection for an ADSL account.
ATM VC Parameters Description
The Router supports using up to eight multiple virtual connections. This
window allows the user to configure WAN settings for all the available
connections (see instructions below on how to set up Multiple Virtual
Connections). Use the PVC drop-down menu to select the connection (Pvc0
to Pvc7) you want to configure. Since most users will use only a single
connection, the default setting Pvc0 can be used for any changes made to
the WAN settings.
PVC
The Virtual Path Identifier is used with the VCI to define a dedicated circuit
on the ATM network portion of the connection to the Internet and WAN.
Most users will not need to change this setting.
VPI
The Virtual Channel Identifier is used with the VPI to define a dedicated
circuit on the ATM network portion of the connection to the Internet and
WAN. Most users will not need to change this setting.
VCI
Virtual Circuit
As with the PVC setting, this is mainly for use by clients who are configuring
the Router for multiple virtual connections. Use this to enable or disable the
PVC you are currently configuring. By default, the Pvc0 is Enabled and the
remaining PVCs are disabled.
44