Operation – Triplett CableRater- PN: 3279 User Manual
Page 9
9
1
P
J
2
P
J
3
P
J
4
P
J
N
O
I
T
P
I
R
C
S
E
D
X
X
X
t
u
o
e
m
i
T
t
s
e
t
r
o
h
S
,
N
O
O
P
A
X
X
t
u
o
e
m
i
T
1
m
u
i
d
e
M
,
N
O
O
P
A
X
X
t
u
o
e
m
i
T
2
m
u
i
d
e
M
,
N
O
O
P
A
X
t
u
o
e
m
i
T
t
s
e
g
n
o
L
,
N
O
O
P
A
X
X
X
t
c
e
f
f
e
o
n
e
v
a
h
4
P
J
d
n
a
3
P
J
,
F
F
O
O
P
A
Note:
Be careful not to drop the jumper inside the product when changing the settings.
8.2.4) After setting the jumpers as desired, install battery and replace battery
cover.
Refer to Figures 1 and 2 for locations of the controls.
9: OPERATION
9.1 Description of Transmitter
9.1.1 ON / OFF Power Switch and UNLOCK Button
When the Transmitter is not in use, the ON / OFF switch should be placed in the
OFF position to conserve the battery life.
To turn the Transmitter ON, depress the UNLOCK button while moving the ON /
OFF switch from the OFF to the ON position. Release the UNLOCK button. When
the switch is moved to the OFF position, it will lock in this position, requiring the
user to again press the UNLOCK button to turn the switch ON.
9.1.2 BATTERY TEST Indicator
The BATTERY TEST indicator is a green LED (Light Emitting Diode) that flashes
periodically when the battery is good. With a good battery, the indicator will
flash initially when the Power switch is moved from the OFF to the ON position,
and then it will flash at intervals to indicate that the battery is still good. Typi-
cally, the indicator flashes at intervals of 5 to 30 seconds. The speed of the
flashing is not critical, and does not indicate the remaining charge in the battery,
only that the battery is supplying adequate power to operate the Transmitter.
In brightly lit situations, such as in direct sunlight, the flashing of the indicator
may not be visible.