Triplett Chek-A-Cell – PN: 3276 - Manual (Page 6)

Use caution if using the CHEK-A-CELL to test battery paks con-
taining electronics. This is usually indicated by the battery having
more than 2 contacts. The additional contacts often connect to
temperature sensors and ‘fuel gage’ electronics. Shorting these
contacts with the CHEK-A-CELL probes can damage the circuitry.
Specifications:
Operating Voltage………………… 5.75 to 19.99 volts DC
Resolution………………………… 0.01 volts
Accuracy………………………….. +/- 0.03 volts (at 25 degrees C,
+/- 5 degrees)
Load Current ……………………… typically 600mA at 6 volts, 1.2
Amps at 12 volts
Battery Amp Hour Rating …………1 to 20 Amp Hours
Duration of Measurement ………...10 seconds maximum
Display ……………………………...3 1/2 digit, 0.56” high, red
LEDs
Test Leads ………………………….approx 28” long, one black
alligator clip supplied
Dimensions ………………………... approx 3 1/4” x 6” x 1 3/8”
Weight…………………………….... approx 11 ounces
Warranty:
ONE YEAR LIMITED WARRANTY
Triplett warrants instruments and test equipment manufactured by
it to be free from defective material or workmanship and agrees
to repair or replace such products which, under normal use and
service, disclose the defect to be the fault of our manufacturing,
with no charge within one year of the date of original purchase for
parts and labor. If we are unable to repair or replace the product,
we will make a refund of the purchase price. Consult the Instruction
Manual for instructions regarding the proper use and servicing of
instruments and test equipment. Our obligation under this warranty
is limited to repairing, replacing, or making refund on any instrument
or test equipment which proves to be defective within one year from
the date of original purchase.
4