Triplett 3526 - Manual (Page 8)

c) If the measured voltage is between the reference limits,
neither LED will light, invalid state.
4. The LCD will display the measured voltage.
Accessories, Parts & Service
Model 3526-B
3526
Black Test Lead 79-771
Replacement Tip 79-772
Fuse 800mA/250V fast blow 3207-122
Users Manual 84-797
Carrying Case 10-4249
Calibration
A one year calibration interval is recommended. Refer to
qualified service personnel.
DO NOT ATTEMPT TO SERVICE THIS UNIT. TAKE IT TO A
QUALIFIED TRIPLETT SERVICE CENTER. ANY ATTEMPT TO
SERVICE BY AN UNQUALIFIED PERSON MAY BE
DANGEROUS AND/OR LETHAL AND WILL VOID YOUR
WARRANTY
TRIPLETT PRODUCT RETURN INSTRUCTIONS
In the unlikely event that you must return your Triplett equipment
for repair, the following steps must be taken.
1) Call 1-800-TRIPLETT to obtain a Return Material
Authorization (RMA) number from Customer Service.
2) Enclose a copy of the original sales receipt showing date of
purchase.
3) Clearly print the RMA number on the outside of the shipping
container.
4) Return to: Triplett Corporation
One Triplett Drive
Bluffton, OH 45817
ATTN: Repair Dept.
Be sure to include a full description of the problem, and a
telephone number, street address, or email address, where you
can be contacted, and a return address where the meter can be
shipped to upon repair.
Triplett One Year Limited Warranty