Tri Tool SQM-1AC Squaring Module - Manual (Page 9)

9
Model SQM-1AC Squaring Module
92-0675 : Rev. 970314
WARNING:
MAINTENANCE
GENERAL
All components should be cleaned and coated with a light film of oil prior to use.
Use a clean, non-detergent oil, preferably SAE 10 (90 SSU) or lighter.
If the Model SQM-1AC is operated in such a manner that it collects debris while
cutting, it should be cleaned after each cutting operation.
Tool life may be severely shortened, unless chips and/or other debris that
have been deposited on the cutting head during the machining operation are
removed.
RECOMMENDED MAINTENANCE SCHEDULE
Daily maintenance when the unit is in operation includes wiping the unit down and
spraying it with a rust preventative under severe humidity conditions.
Visually inspect for loose screws, missing screws, damage, etc.
If the Model SQM-1AC is to be stored or if it will remain out of service for a
significant period of time (30 days or more), it should be thoroughly cleaned,
lubricated and sprayed with a rust preventative prior to storage.