Tri Tool SQM-1AC Squaring Module - Manual (Page 6)

6
TRI TOOL INC.
92-0675 : Rev. 970314
GENERAL DESCRIPTION
The SQM-1AC Squaring Module mounts on the Model 572AC SEVERMASTER TM .
The mount incorporates a pivot post to allow the SQM-1AC to be “parked” over the
cutting face during a sever operation.
After a sever is complete, the SQM-1AC may be pivoted into position for performing
a burr free end squaring operation.
A manual feed with a helical gear reduction allows the operator to control the depth
of the cut to the end squaring operation.
The SQM-1AC covers the full range of the Model 572AC SEVERMASTER TM .