Tri Tool 75-0078 Air Caddy - Manual (Page 12)

12
TRI TOOL INC.
92-0084 : Rev. 070227
CAUTION:
Set the regulator pressure by lifting the adjustable knob.
To raise the regulator pressure, turn the adjustable knob clockwise.
To lower the regulator pressure, turn the adjustable knob counterclockwise.
When the desired operating pressure is achieved, the operator may lock the
adjusting knob by pushing it down.
To adjust the lubricator oil flow rate, turn the precision oil adjustment knob on the top
of the lubricator unit.
The oil flow response time is slow.
Start the lubricator oil flow rate, close the precision oil adjustment screw no more
than finger tight and then back it off 1/4 turn.
This is to prevent damage to the needle or the valve seat inside of the lubricator.
Setting the Regulator Pressure