Tri Tool 75-0078 Air Caddy - Manual (Page 10)

10
TRI TOOL INC.
92-0084 : Rev. 070227
CAUTION:
NOTE:
Rotate the bowl to unearth it from the filter body.
Periodically drain the accumulated moisture from the filter unit by turning the drain
knob on the bowl counter clockwise.
When servicing the lubricator with oil, use only clean, NON-DETERGENT OIL,
preferably SAE 10 (90 SSU) or lighter. (P/N 68-0022 is recommended)
Sears regular motor oil or Sinclair ‘motor oil’ are not recommended.
Fill the lubricator through the large fill port on top of the lubricator unit approximately
3/4” full. Do not fill to the tip of the bowl.
The lubricator may not be filled with oil while the unit is under pressure.
Periodically remove the adjusting screw and clean the needle and the seat in the
body by blowing off with an air blow gun.
Drain off any contaminants that may collect in the bottom of the bowl.
Regulator