Tri Tool 620SB Clamshell Air - Manual (Page 17)

17
Model 620SB Low Profile Clamshell, Air
92-0220 : Rev. 131230
NOTE:
LUBRICANT RECOMMENDATIONS
The Drive Gears require a high string lubrication grease such as “Chevron Utility
Grease, light, high string for gears” (P/N 68-0020).
The Slide Rails and Tool Blocks require a light oil such as SAE 10 light machine oil.
The Feed Screw for the Tool Block and the Tripper Block Assy require a SAE 10
light machine oil for normal conditions and under dusty conditions a silicone,
graphite or molybdenum disulfide ‘dry’ lubricant.
A light film of all-purpose grease may be used, but it must be checked for grit
contamination frequently.
The Air Motor requires a Class 2 lubricant, viscosity of 100 to 200 SSU at 100 O F
(38 O C) minimum aniline point of 200 O F (93 O C).
Tri Tool Inc.– Air Tool Lubricant (P/N 68-0022)
AMOCO – American Industrial Oil No. 32
Atlantic Richfield – Duro Oil S-150
Chevron – A.W. Machine Oil 32
Exxon – Nuto H32
Shell – Tellus Oil 32
The bearings in the Air Motor are sealed and do not require any lubrication.