Tri Tool 304 Collet Adapter Kit - Manual (Page 9)

9
Collet Adapter Kit, 304
92-0776 : Orig. 980903
OPERATION
IN GENERAL
Read the operating instructions carefully before attempting to operate the Model 304
Tube Squaring Machine.
Remove the Saddle Adapter Assembly by loosening the (4) four Cap Screws (Item A)
on the front face of the Saddle Adapter.
Mount the Collet Adapter Kit to the face of the 304 Main Housing. Insert (2) two Cap
Screws (Item B) from the front of the Collet Adapter and (2) two Cap Screws (Item C)
from the front of the (304) Main Housing into the back of the Collet Adapter.
INSERTING THE COLLET
Select the desired size Collet for the pipe or tube to be worked on.
Raise the Handle to release pressure on the Adjust Nut.
Rotate the Adjust Nut until the eyebolt can be raised out of the slot and then the Hinge
Bracket may be rotated back and down.
Remove the Pusher Sleeve from the Main Housing.