Tri Tool 304 Collet Adapter Kit - Manual (Page 8)

8
TRI TOOL INC.
92-0776 : Orig. 980903
CAUTION:
CAUTION:
NOTE:
MAINTENANCE
All Components should be cleaned and coated with a light film of oil prior to use.
Use a clean, non-detergent oil, preferably SAE 10 (90 SSU or lighter).
The air supply for the Collet Adapter Kit, 304 with an air motor should include an
adequate filter/regulator/lubricator (FRL).
The Air Motor warranty is void if damage occurs from contaminated air or lack of
lubrication.
If the Collet Adapter Kit, 304 is operated in the vertical position (cutting head up), it
should be turned upside down and the chips and/or other debris removed after each
cut is completed.
Tool life may be severely shortened, unless chips and/or other debris, that have
been deposited on the cutting head during the machining operation, are
removed.
Bearing and gears are to be lubricated using Chevron Ultra Duty Grease, EP, NLGI2 or
equivalent.
Disassembly of the power unit voids warranty, except when performed by a
TRI TOOL Inc. designated repair technician. A letter of designation is required.