Tri Tool 214B Elbow Mandrel - Manual (Page 7)

7
Model 214B BEVELMASTER ® EM (Elbow Mandrels)
92-1502 : Orig. 100923
NOTE:
DESIGN AND OPERATING FEATURES
The elbow mandrel can be set up in the bore before the 214B is installed onto the
mandrel shaft.
The mandrel heads have interchangeable contact pins to allow configuring mandrel
sub-assemblies for different inside diameter mounting ranges.
A perch length of only .75" (19.1 mm) is required.
Self-centering, push rod actuated locking.
IN SPECIFIC
Weight
15 lbs (6.80 kg)
Cutting Capacity
Basic Pipe Sizes
4" - Schedule 5 through 160
5" through 12" pipe - *All schedules
*Not recommended for Sch 40 and lighter.
14" – Schedules XS through 160
ID Mounting Range
3.31" (84.1 m) through 13.12" (333.2 mm)
Mounting
.75" (19.1 mm) axial length, 3 pin contact.
SPECIFICATIONS