Tri Tool 214B Elbow Mandrel - Manual (Page 12)

12
TRI TOOL INC.
92-1502 : Orig. 100923
SETUP AND OPERATION
MANDREL SETUP IN AN ELBOW
The Mandrel should be setup in the elbow so that one pin contacts the inside diam-
eter of the elbow at the top.
This will help center the Mandrel.
Contact Pin at the top
of the elbow radius
IN GENERAL
All components should be cleaned and coated with a light film of oil prior to storage.
If the mandrel is operated in such a way that the mandrel collects chips or debris
near the head, the head should be cleaned after each cutting operation.
Contact Pin Orientation