Tissot 120 - Manual (Page 4)

Navigator 3000
*
www.tissot.ch 120_EN / 01.06 4/7
Synchronization of
digital time / analog time
When the “ECO BAT“ function is
displayed, press the crown for 5“,
and the hands should be positioned
on midday. Otherwise, they should
then be positioned as indicated
below.
Press tactile zone to move the
minute hand forward;
Press tactile zone to move the
hour hand forward.
Confirm by pressing the crown.
Add the name of a city
One after the other, select the
letters of the name to be created
by means of tactile zone or (8
letters at most).
Confirm each letter by pressing the
crown.
After the final confirmation, you
can set the time if necessary (see
above).
If you detect a difference between
the time displayed by the hands and
the digital display, you can reset the
hands:
5“
To add the name of a city, select the
“NEW“ function by means of tactile
zone or .
Confirm by pressing the crown.
Through its T-World function, your watch can display the time in four other
time zones, parameterizable. The standard settings give the local time in
New York, Rio de Janeiro, Thailand and Sydney, but they can be changed
by selecting one of the 150 other pre-memorized zones.
You can also select the reference time with the SWAP function, display
the absolute time or the time difference with the ABS function, and even,
in Expert mode, alter the date for changing summer time and winter time
(DST or daylight saving time function).
Time zone mode
Touch the screen to select the desired
region or to navigate through to the
“SET“ function.
To access the settings, select the “SET“
function and then press the crown.
Touch the screen several times
until you reach the setting you
wish to change, then press the
crown to confirm your choice.
2“
Absolute time
(GMT)
2“
Time difference or
Expert mode