Denon DCD-F102 - Manual (Page 12)

Operation Operation
8
ENGLISH
ENGLISH
Press [ 8 ] or [ 9 ] during playback.
The operation is as follows if the button is held in:
9 : Skip to the beginning of tracks several tracks on
8 : Skip to the beginning of tracks several tracks before
Playing the desired track (Direct play)
Use [NUMBER] (1 ~ 10, +10) to select the track.
For track numbers 1 to 10, press the corresponding button ([1] to
[10]).
For track numbers 11 and on, first press [+10] then press buttons
[1] to [10].
Example: Track 4 : [4]
Example: Track 12 : [+10] [2]
Example: Track 20 : [+10] [10]
In the stop mode, press [PROG] .
• “PGM” is displayed.
Use [NUMBER] (1 ~ 10, +10) to select the track.
Example: To program tracks 3, 12, 7 to play in that order:
[3] [+10] [2] [7]
Press 1 / 3 .
• The tracks are played in the programmed order.
Up to 25 tracks can be programmed.
1
2
3
Listening to specific tracks in a specific order
(Programmed play)
¢ Checking the programmed tracks:
In the stop mode, press [CALL].
Press and hold < 7 / 9 > or [ 9 ] during playback.
Normal playback resumes when you release your finger from the
button.
¢ To search forward at high speed:
In the pause mode, Press and hold < 7 / 9 > or [ 9 ].
Press and hold < 8 / 6 > or [ 8 ] during playback.
Normal playback resumes when you release your finger from the
button.
¢ To search backward at high speed:
In the pause mode, Press and hold < 8 / 6 > or [ 8 ].
Fast-forwarding (Search)
Fast-reversing (Search)
Moving to the beginning of tracks (Skip)
Track number of first track in program
Track number of second
track in program Track number of last track in
program
The total program time reappears if [CALL] is not operated for 5
seconds or more.
• The sound may be interrupted shortly when resuming normal
playback after searching.
• The sound may be interrupted shortly when resuming normal
playback after searching.
[PROG]
[ 8 ]
1 / 3
[ 9 ]
[REPEAT]
[NUMBER]
(1~10, +10)
[RANDOM] [CALL]
[CLEAR/DEL]
1 / 3
< 7 / 9 > < 8 / 6 >
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.