Operation – Denon DCD-F102 User Manual
Page 11
Operation
7
ENGLISH
ENGLISH
Turning the power on
[POWER OFF]
1
/
3
2
[TIME/DISPLAY]
<
5
>
2
1
/
3
About the button names in this explanation
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Operation
Press
.
• When the power turns on, the power indicator lights green.
¢ Turning the power off (to the standby mode):
Press
The power indicator turns off.
NOTE:
• To turn off the power while a disc is playing, be sure to press
2
to stop playback before turning off the power.
• When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
Loading discs
Press
<
5
>
to open the disc tray.
(
page 2)
¢ To close the disc tray:
Press <
5
> again.
NOTE:
• Be sure to turn on the power when opening and closing the disc
tray.
• Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
• Do not insert foreign objects into the disc tray. Doing so will
damage it.
Starting playback
Press
1
/
3
.
• The “
1
” indicator lights and playback starts.
Once all the tracks recorded on the disc have been played, the
stop mode is set automatically.
[TIME/DISPLAY] can be used to switch the information displayed.
To stop playback
Press
2
during playback.
To pause playback
Press
1
/
3
during playback.
• The “
3
” indicator lights and the pause mode is set.
¢ To resume playback:
Press
1
/
3
.
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
Elapsed time of
currently playing
track
Remaining time of
currently playing
track
Remaining time of all remaining tracks