D-Link DES-1218 - Manual (Page 18)

DES-1218/DES-1226 10/100/1000 Mbps Ethernet Switch User’s Guide
8
Mounting the Switch in a standard 19” rack.
Figure 2-3 DES-1226 Switch in Rack
Power on
Plug one end of the AC power cord into the power connector of the switch and the other
end into the local power source outlet.
After the Switch is powered on, the LED indicators will momentarily blink. This
blinking of the LED indicators represents a reset of the system.
Power Failure
As a precaution, in the event of a power failure, unplug the switch. When power is
resumed, plug the switch back in.