D-Link DES-1218 - Manual (Page 14)

DES-1218/DES-1226 10/100/1000 Mbps Ethernet Switch User’s Guide
4
♦ RS-232 DCE console port for Switch management
Ports
♦ 16 or 24 High-performance ports for connecting to end stations, servers and
hubs (MDI-X 10/100 Ethernet UTP ports and 1 MDI-X/MDI-II Uplink port).
♦ All UTP ports can auto-negotiate between 10Mbps/100Mbps, half-duplex, or
full duplex and flow control.
♦ One front panel slide-in module interface for the DES-122G 2 port 1000BASE-
SX (SC type connector), DES-122GL 2 port 1000BASE-LX, DES-122GB 2 port
GBIC, DES-122T 2 port 1000BASE-T, and DES-122GM 2 port 1000BASE-SX
(MTRJ type connector) for connecting to another switch, server or network
backbone.
♦ RS-232 DCE Diagnostic port (console port) for setting up and managing the
Switch via a connection to a console terminal or PC using a terminal emulation
program.
Optional Gigabit Extension Modules
1000BASE-SX (SC) Module (DES-122G)
♦ 1000BASE-SX (with SC type connector) Gigabit Ethernet ports
♦ Fully compliant with IEEE802.3z
♦ Support Full-duplex operation only
♦ IEEE 802.3x compliant Flow Control support for full-duplex
♦ Per port packet buffer: 2Mbytes
1000BASE-LX (SC) Module (DES-122GL)
♦ 1000BASE-LX (with SC type connector) Gigabit Ethernet ports
♦ Fully compliant with IEEE802.3z
♦ Support Full-duplex operation only
♦ IEEE 802.3x compliant Flow Control support for full-duplex
♦ Per port packet buffer: 2Mbytes
GBIC Gigabit Ethernet Module (DES-122GB)
♦ GBIC Gigabit Ethernet ports
♦ Support Full-duplex operation only
♦ IEEE 802.3x compliant Flow Control support for full-duplex
♦ Per port packet buffer: 2Mbytes
Note: This module requires using a GBIC converter. Contact your D-Link vendor for
either the DGS-701 1000BASE-SX GBIC FTR-8519-3A (Finisar) or DGS-702
1000BASE-LX GBIC FTR-1319-3A (Finisar).
1000BASE-T Module (DES-122T)
♦ 1000BASE-T Gigabit Ethernet ports
♦ Fully compliant with IEEE802.3ab
♦ Support Nway Auto-negotiation for full-duplex operation