Thermo Technologies Slope Roof User Manual
Page 4
M A Z D O N ‘ 2 ’ T Y P E S Y S T E M
4
5.
Locate and secure the UPPER band to the top end of the side rail (Pt. No. B0282)
using the lower hole. Use the Nylon washer (Pt. No. A2158) to hold the bolt of the
lowest hole in place for later use. Remove upper tiles.
6. Locate and secure end of the side rail (Pt. No. B0282) to the LOWER band using the
middle hole in the side rail. Use the Nylon washer (Pt. No. A2158) to hold the bolt in
place for later use.
7. Secure UPPER band to rafter. [FIG.2(M) (7)]
8.
Locate and secure support rails (Pt. No. B0177 (20) / B0178 (30)) to the side rails
[FIG.2(M) (6)] and [FIG.2(M) (8)]
Note: This process (steps 2 to 7) should be repeated for the opposite side of the
frame.