Thermo Technologies Flat Roof - Manual (Page 4)

4
(3) Fix rear struts (Pt. No. B0007C) to rear bracket.
(4) Bolt the bottom support rail (pt. No B0178A) to side rail (Pt. No. B0282A) and the front
brackets hinge (Pt. No. A0174A) using lower hole in side rail. Distances from side rails to
ends of the support rail ends should be equal.
(5) Bolt top support rail (pt. No. B0288E) through lower hole in top end of side rail to hinge
plate on top of rear strut (Pt. No. B0007B). Distances from side rails to top support rail ends
should be equal.
(6) Locate and secure a universal brace (Part No. B0006B) using the single hole, to the front
bracket. Secure slotted end of universal brace to rear strut in either p osition shown. Locate
second universal brace on other side of frame.
(7) Secure a third universal brace diagonally between rear struts and cut off any excess
lengths.