Teo 6210 ISDN Phone - Manual (Page 29)

Tone Commander 6210/6220 User Guide 25
Feature Activator Codes
Feature activator codes are assigned by your network service provider.
Consult with your network service provider for the required codes.
Feature Activator (FA) numbers are entered with the FA
softkey, and are shown in the display as an F character. F
must be the first character in the dialing string; the two
numeric digits immediately following the F indicate the
network feature activator code. The FA softkey is only
available when no digits have been entered.
After entering F, the FA softkey will be replaced by CLEAR.
In the example below, the Speed Dial key sends feature code
‘57’ (Call Forward) followed by the directory number ‘987-
1234’.
When all digits have been entered, press the Done key to
return to the key selection menu. Done
|BKSP FA PAUSE
F579871234
|BKSP CLEAR PAUSE