Tech Source Condor 2000 Series User Manual

Page 9

Condor 2000 Series User’s Guide

Part #65-0286-04 Rev A

Windows Software

Windows Software Installation

Installation

4.1

4.1 Windows Display Driver

Windows Display Driver

The following section describes how to install and configure the display driver for the Condor 2000 Series
graphics card for the Windows operating system.

AMD Catalyst Display Driver can be obtained

from AMD’s support page :

http://ati.amd.com/support/driver.html

From the choices provided, select the type of system (Embedded Graphics), the product family (Radeon

Embedded), the product (E4690), your Windows operating system, and then select ‘Display Results’.

Direct link to the AMD Catalyst Display Driver for Windows :

http://support.amd.com/us/gpudownload/embedded/Pag

http://support.amd.com/us/gpudownload/embedded/Pages/embedded_windows_all.aspx

es/embedded_windows_all.aspx

The AMD Catalyst Display Driver for Windows is designed to support the following Windows operating
system versions :

•

Windows XP

•

Windows 7

•

Windows Embedded ( Please Ask )

4.2

4.2 Windows Installation Procedure

Windows Installation Procedure

Follow the steps below to install the AMD Catalyst Display Driver for Windows.

1. Install a supported Condor 2000 Series graphics card in the single board computer and boot the

system. Refer to Section 2

Section 2

Section 2 for installation steps.

2. Log in to the operating system as an administrator on the target system.

3. Uninstall any previous versions of the AMD software that may be on the system.

To remove the software, use the ‘Add/Remove Programs’ function found under the ‘Control Panel’
and select the appropriate AMD software to be removed.

4. Create a local location for your AMD Windows driver, such as: C:

C:\\\\temp

temp

5. Open an Internet Browser in your Windows environment.

6. Navigate to the following link to install the software and drivers:

http://support.amd.com/us/gpudownload/embedded/Pages/embedded_windows_all.aspx

7. Click on the download button to begin downloading the software. Save the software package to

the local location you created in step 4.

8. After the download is complete, change your directory to the “saved” file folder and unzip the

compressed file:

For Example:

8.90

8.90----110915a

110915a

110915a----126000C

126000C

126000C----EDG_Direct.zip

EDG_Direct.zip