Tech Source Condor 3000 Series User Manual

Page 9

Condor 3000 Series User’s Guide

Part #65-0287-01 Rev A

Windows

Windows Display Driver

Display Driver

Display Driver Installation

Installation

4.1

4.1 System Overview

System Overview

The following section describes how to install and configure the Condor 3000 Series graphics cards
software drivers for the Windows Operating system.

AMD Catalyst Display Driver can be obtained

from AMD’s support page :

http://ati.amd.com/support/driver.html

From the choices provided, select the type of system (Embedded Graphics), the product family (Radeon

Embedded), the product (E6760), your Windows operating system, and then select ‘Display Results’.

Direct link to the Windows display driver :

http://support.amd.com/us/gpudo

http://support.amd.com/us/gpudownload/embedded/Pages/embedded_windows_all.aspx

wnload/embedded/Pages/embedded_windows_all.aspx

The AMD Catalyst Display Driver for Windows is designed to support the following Windows operating
system versions:

•

Windows XP

•

Windows 7

•

Windows Embedded ( Please contact Tech Source )

4.2

4.2 Windows Install

Windows Install

Windows Installation Procedure

ation Procedure

Follow the steps below to install the AMD Catalyst Display Driver for Windows.

1. Install a supported Condor 3000 Series graphics card in the single board computer and boot the

system. Refer to Section 2 for steps.

2. Log in to the operating system as an administrator on the target system.

3. Uninstall any previous versions of the AMD software that may be on the system.

To remove the software, use the ‘Add/Remove Programs’ function found under the ‘Control Panel’
and select the appropriate AMD software to be removed.

4. Create a local location for your AMD Windows driver, such as: C:

C:\\\\temp

temp

5. Open an Internet Browser in your Windows environment.

6. Navigate to the following link to install the software and drivers:

http://support.amd.com/us/gpudownload/embedded/Pages/embedded_windows_all.aspx

7. Click on the download button to begin downloading the software. Save the software package to

the local location you created in step 4.

8. After the download is complete, change your directory to the “saved” file folder and unzip the

compressed file:

For Example:

8.89

8.89----110810a2

110810a2

110810a2----124124C

124124C

124124C----EDG_Direct.zip

EDG_Direct.zip

9. Double-click the uncompressed

setup.exe

file to begin installation. A software dialog box will open

and prompt you to continue with the installation.