Tecfluid MT03L - Manual (Page 24)

24
13.3 Access to installation and programming
In order to change the data contained in the "Install" tab, you must enter a password.
The default password is install, and it can be changed using the boxes on the right of the
"Installation" section.
Likewise, to change the data contained in the "Programming" it is necessary to enter the
password which by default is program. This can be changed using the boxes on the right of
the "Programming" section.
13.2 Port connection
In the "Port" section, choose the appropriate port for the converter. This will appear with the
name of the port followed by MT03L and its serial number. Then click "Open".
Once the port is open, the button "Open" in the "Installation" and “Programming” sections
activates.