Teac SR-LUXi - Manual (Page 6)

6
Before Use (2)
Remote Control Unit
The included remote control unit allows the
unit to be operated from a distance.
< Even if the remote control unit is used within
its effective range, operation by remote control
might be impossible if there are any obstacles
between the unit and the remote control.
< If the remote control unit is operated near other
devices that generate infrared rays, or if other
remote controls that use infrared rays are operated
near the unit, this unit might operate incorrectly.
The other devices might also operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Put the lithium battery (CR2032, 3V) in with the
+ side up.
3. Close the cover.
Battery Replacement
If the distance to the unit from which the
remote control can be used decreases, the
battery has lost its charge. If this happens,
replace the battery with a new one.
For information about the collection
of batteries, please contact your local
municipality, your waste disposal service or
the place where you purchased the items.
Precautions concerning batteries
Misuse of batteries could cause them to
rupture or leak, leading to fire, injury or
the staining of nearby things. Please read
and observe the following precautions
carefully.
< Be sure to insert batteries with correct positive
(+) and negative (_) orientations.
< If the remote control will not be used for a long
time (more than a month), remove the battery
to prevent it from leaking.
< If a battery leaks, wipe away the leakage inside
the battery compartment and replace the bat-
tery with a new one.
< Do not use batteries of types other than those
specified.
< Do not heat or disassemble batteries. Never
throw batteries into fire or water.
< Do not carry or store batteries with other
metallic objects. The batteries could short cir-
cuit, leak or explode.