Specifications, External dimensions, Rating – Teac CD-601MKII User Manual
Page 27: Analog outputs, Digital outputs, Other i/o, Analog output electrical characteristics, Other characteristics, General
TASCAM CD-601MKII
27
SPECIFICATIONS
Rating
Model:
CD player
Discs used:
Compact discs (12 cm, 8 cm)
Compatible discs:
Audio CD (CD-DA), CD-R,
CD-RW,
Number of audio channels: 2 channels
Number of quantized bits:
16-bit linear/channel
Sampling frequency:
44.1 kHz
Transmission rate:
4.3218 MB/sec
Modulation method:
EFM
Pickup drive system:
Objective lens drive system,
optical type 3 beams
Objective lens drive system: 2D parallel drive system
Light source:
Semiconductor laser
Wavelength:
780 nm
ANALOG OUTPUTS
BALANCED (L, R)
Connector:
XLR 3-31 or equivalent
Specified output level: +4 dBu
Max. output level:
+24 dBu, +22 dBu, +20 dBu,
+15 dBu (according to output level
setting)
Output level calibration variable range:
0 dB to -6 dB or more
Output impedance:
150 Ω
UNBALANCED (L, R)
Connector:
RCA
Specified output level: -10 dBV
Max. output level:
+6 dBV
Output impedance:
100 Ω
PHONES
Connector:
Stereo phone jack
Max. output level:
50 mW + 50 mW (at 32 Ω load)
DIGITAL OUTPUTS
AES/EBU
Connector:
XLR 3-31 or equivalent
Output signal format:
IEC60958-4 (AES/EBU)
Output impedance:
110 Ω
Sampling frequency:
44.1 kHz, 48 kHz
(at word synchronization)
SPDIF
Connector:
RCA pin jack
Output signal format:
IEC60958-3 (S/PDIF)
Output impedance:
75 Ω
Sampling frequency:
44.1 kHz, 48 kHz
(at word synchronization)
Other I/O
WORD SYNC IN
Connector:
BNC
Input impedance:
75 Ω (automatic termination)
Input level:
TTL level
Synchronizing frequency range:
44.1 kHz ±0.1% and 48 kHz ±0.1%
WORD SYNC THRU
Connector:
BNC
REMOTE (PARALLEL)
Connector:
37-pin D-Sub female
REMOTE (SERIAL)
Connector:
15-pin D-Sub female
Electrical characteristics: RS-232C-compliant
Analog Output Electrical Characteristics
The following characteristics are the balanced and
unbalanced analog output specifications.
Playback frequency response: 20 Hz to 20 kHz, ±0.5 dB
Signal-to-noise ratio:
102 dB or more
(20 kHz LPF, A-weighted)
Dynamic range:
98 dB or more
(20 kHz LPF, A-weighted)
[1 kHz max. output level -60 dB]
Distortion (THD+N):
0.008% or less (20 kHz LPF)
[1 kHz max. output level]
Channel
Separation:
90 dB or more [1 kHz]
Wow flutter:
Measured limit value or less
Other Characteristics
Audio rise time:
Within 10 msec
Anti-shock time:
20 seconds
General
Power requirements:
USA/CND:
120 V AC, 60 Hz
EUR/UK:
230 V AC, 50 Hz
AUS:
240 V AC, 50 Hz
Power consumption:
24 W
External dimensions:
220 W x 142 H x 382.4 D (mm)
(including feet and protrusions)
Weight:
6.0 kg
Operating temperature: 5 to 35°C
Max. tilt of installation surface: 5 degrees
Accessories:
Power cable, Owner’s Manual,
Warranty
z
Specifications and external appearance are subject
to change without notice in the interest of product
improvement.
z
Note that illustrations in the Owner’s Manual may differ
on some products due to product improvements.
External Dimensions
361.5
11
382.4
142
130
220
CD-601MKII_Eng.indd 27
3/26/2005 7:40:10 PM