External control, Parallel control, Setting fader start/stop – Teac CD-601MKII User Manual
Page 25
TASCAM CD-601MKII
25
EXTERNAL CONTROL
Parallel Control
The CD player can be controlled on the parallel interface
from external equipment using the REMOTE (PARALLEL)
terminal (37-pin D-Sub connector) on the rear panel.
Pin Arrangement
Pin No. Signal Name
IN/OUT
1
ON LINE PLAY IN
IN
2
MONITOR PLAY IN
IN
3
PAUSE IN
IN
4
READY IN
IN
5
STOP IN
IN
6
TRACK SEARCH REV IN [ |<< ]
IN
7
N.C
–
8
TRACK SEARCH FWD IN [ >>| ]
IN
9
SEARCH REV IN [ << ]
IN
10
SEARCH FWD IN [ >> ]
IN
11
MONITOR PLAY TALLY
OUT
12
READY TALLY
OUT
13
PAUSE TALLY
OUT
14
STOP TALLY
OUT
15
INDEX SERACH REV IN [ <- ]
IN
16
INDEX SEARCH FWD IN [ -> ]
IN
17
ON LINE PLAY TALLY
OUT
18
FLASH READY IN
IN
19
FLASH MODE IN
IN
20
EOM OUT
OUT
21
FADER START/STOP IN
IN
22
ONLINE PLAY / MONITOR PLAY OUT OUT
23
TEN KEY 0 IN
IN
24
TEN KEY 1 IN
IN
25
TEN KEY 2 IN
IN
26
TEN KEY 3 IN
IN
27
TEN KEY 4 IN
IN
28
TEN KEY 5 IN
IN
29
TEN KEY 6 IN
IN
30
TEN KEY 7 IN
IN
31
TEN KEY 8 IN
IN
32
TEN KEY 9 IN
IN
33
STOP/READY OUT
OUT
34
FLASH READY TALLY
OUT
35
FLASH MODE TALLY
OUT
36
GND
–
37
+5 V
–
Parallel control I/O specifications
Input
: +5 V pull-up, Low Active, 50 ms or more
Output : Open collector, 20 mA max.
+5 V (pin No. 37) max. current: 100 mA
Setting fader start/stop
Fader start/stop is possible by connecting the No. 21 pin
(FADER START/STOP IN) and No. 36 pin (GND) of the
REMOTE (PARALLEL) terminal to the external interface.
At a fader start, the CD player enters the online playback
mode.
To start/stop the CD player from an external fader, set the
following menu items.
Setting fader start
Set the polarity using menu No. 14 (“F_STAR”).
NOR (NORMAL): Low Active. The CD player starts when
the input signal is switched from High to Low.
REV (REVERSE): High Active. The CD player starts when
the input signal is switched from Low to High.
Setting fader stop
Set the state of the CD player at stop operation using menu
No. 15 (“F_STOP”).
STP (STOP): The CD player stops.
RDY (READY): The CD player enters the online READY
mode.
PUS (PAUSE): The CD player enters the monitor PAUSE
mode.
CUE: The CD player returns to the cue point (point at fader
start), and enters the online READY mode.
INC (INCREMENT): The CD player enters the online
READY mode at the start of the next track.
PLY (PLAY): Online playback is continued.
1
20
19
37
CD-601MKII_Eng.indd 25
3/26/2005 7:39:55 PM