Teac DVW-D13A - Manual (Page 25)

10.4 Close Session
TEAC Tower DVD Duplicator User’s Manual 17
10.4 Close Session
This function finalizes your CD-R disc. Once the CD-R disc is finalized, no more
audio can be added to that disc.
11 Setup
The Setup menu includes a list of options that enable you to change the original
default configuration. Various settings are available under the Setup menu that
control the operation of the DVD Duplicator. However, TEAC recommends that
you use the original default settings for optimal operation.
11.1 Language
The DVD Duplicator LCD panel can display text in English and Spanish. The
Language function enables you to select the display language. English is the
default option.
11.2 CD Burn Speed
The CD Burn Speed setting controls the writing speed of the target drive when
recording onto CD-R/CD-RW media. The default value is AUTO , which writes at
the highest speed allowed by the media.
11.3 DVD Burn Speed
The DVD Burn Speed setting controls the writing speed of the target drive when
recording onto DVD±RW media. The default value is MAXIMUM , which writes at
the highest speed available on the target drive. On occasion, using the maximum
writing speed will cause copy failure due to poor quality DVD±RW discs. In this
case, TEAC recommends that you reduce the writing speed.
11.4 Read Speed
The Read Speed function enables you to set the reading speed of the target drive.
MAXIMUM is the default setting.
11.5 Auto Start Drive
The Auto Start Drive setting enables the DVD Duplicator to auto-start the copy or
test process as soon as a blank disc is inserted into the target drive. The default
setting is
OFF .
TEACdvwd17h.book Page 17 Sunday, May 1, 2005 6:28 PM