Teac DVW-D13A - Manual (Page 13)

Rear Panel
TEAC Tower DVD Duplicator User’s Manual 5
Rear Panel
Figure 4 illustrates the rear panel of the DVD Duplicator unit.
Figure 4. Rear Panel of the DVD Duplicator Unit
cooling fan: Ball-bearing fans cool the DVD Duplicator.
AC voltage selector: Use this switch to select either 115VAC or 220VAC.
AC IN power connector: Connect the included AC power cable to this input
connector. Plug the other end of the power cable into a three-prong receptacle
AC power outlet.
Caution: Before you turn on the power to the DVD Duplicator, make sure
the correct voltage is selected. Otherwise, you risk damage to the unit. The
default setting is 115VAC.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk
electrical shock or damage to the unit.
Note: To ensure proper operation, use only the original AC power cable with
your TEAC Tower DVD Duplicator unit.
AC IN power connector
cooling fans
AC voltage
selector
TEACdvwd17h.book Page 5 Sunday, May 1, 2005 6:28 PM