SVS PLASMA TWO User Manual
Page 10
b. To raise the lift back to a storage position, turn the keyswitch to "ON" and press the toggle switch up.
The lift will stop once its top frame compresses the up limit switches.
Important: The toggle switch on the control plate needs to be pressed at all times to activate the lift. It is
designed as a safety feature (the lift can be stopped at any time). The key is an extra precaution as well:
when removed, the lift is secured. If an external controller is use, please make sure that no object is
standing in the lift path as it lowers to a service position.
LIFT SPECIFICATIONS
USA
INTERNATIONAL
VOLTAGE
110V/60HZ
220V/50HZ
LOW VOLTAGE CONTROLLER
24v/ac
24v/ac.
CURRENT DRAW
2.3 amps
2.3 amps/1.2 amps
MATERIAL
Steel/Aluminum
Steel/Aluminum
Power Requirements:
110v/50-60hz -220v/50-60hz
Low Voltage Controller:
Supplied with the lift. 12 pin connector plug. 75' of
Cable (22 gauge/5 conductors).
SVS PLASMA TWO LIFT INSTALLATION
Page 10 of 13