Super Systems e-TRIM - Manual (Page 6)

Super Systems Inc. Page 6 of 27 e-TRIM Operations Manual
Details
NOTE: This manual was written with oxygen readings from the ambient air, not in a valid run-
time environment.
This will display a details screen for the e-TRIM system.
The Details screen is basically an expanded version of the main screen. Four burners are shown
on the screen at one time, and each burner will have its oxygen reading and status displayed on
the screen. Clicking on the Toggle button will display the next four burners, etc.
Clicking on the Close button will close the Details screen.
Clicking on the burner number will display some details about the specific burner: The board
address, baud rate, board version, TC type, TC temperature, Cold Junction temperature,
diagnostic, and percent oxygen.
Menu
This will display the menu, which will allow the user to configure the e-TRIM system. See the
section e-TRIM Menu for instructions on using the menu.