Super Systems Bazooka Probe - Manual (Page 9)

Bazooka Probe TM Operations Manual
Super Systems Inc. Page 9 of 10
Warranty
Super Systems, Inc. (SSi) as manufacturer of the Bazooka Probe™, warrants it for a period of
one year to be free from defects in material and workmanship under normal use and service.
SSi’s obligation under this warranty is limited to repairing or replacing, at its option, the sensor
described herein, should failure occur within the warranty period. The warranty period shall
commence on installation of the sensor as certified by receipt of the postage-free Registration
Card accompanying the sensor. If premature failure occurs, the sensor along with the Warranty
Claim Report must be returned in the complete, original packaging to SSi. Upon receipt, SSi
will conduct an examination as to the cause of failure, at which time appropriate action will be
taken.
For sensors operating at elevated temperatures, the warranty period is prorated such that full
warranty is granted for operation below 1850°F (1010°C); six months warranty for temperatures
between 1850°F (1010°C) and 1950°F (1065.6°C); three months warranty between 1950°F
(1065.6°C) and 2050°F (1121.1°C), and no warranty above 2050°F (1121.1°C).
There are no warranties, expressed or implied, by the distributors or representatives for the
Bazooka Probe™, except the expressed warranty against defects described above. There will be
no applicable warranty in the event of breakage resulting from thermal or mechanical shock.
Additionally, there will be no applicable warranty for a probe which has been subject to misuse,
negligence or accidental damage.
This warranty cannot be honored unless the Registration Card is received at SSi prior to the
Warranty Claim Report, and the use and installation is accomplished according to the
techniques and procedures described in the Bazooka Probe™ Manual. SSi shall in no way be
liable for special or consequential damages related to the use of this sensor.