Sundance SMT356 User Manual

Page 23

Version 2.1

Page 23 of 26

SMT356356 User Manual

This bit is necessary to ensure that the hardware of the SMT332 is in a known good
state.

// set mux signal to known state

for(i=0;i!=16;i++);

*emifce3=0xffff3f23;

for(i=0;i!=16;i++);

fifobase=(unsigned *)0x0300c000;

*fifobase=temp;

fifobase=(unsigned *)0x03008000;

*fifobase=temp;

fifobase=(unsigned *)0x0300c000;

*fifobase=temp;

for(i=0;i!=16;i++);

*emifce3=0x00000030;

for(i=0;i!=16;i++);

Here we go with the main application.

// start of scope loop

pass=0;

Select a full capture size of 256 samples.

samples=256;

Enable all channels. Remember there is one enable bit for each channel.

channels=255;

active_channels=8;

Set the clock divider to 10.

divider=10;