Sundance SMT8056 - Manual (Page 8)

3 Application Description
3.1 What Happens
When the .app file is executed Diamond will typically send a RESET signal to the
carrier (and all modules). The DONE LEDs on the 365 (D6) and 356 (LED5) will
illuminate. This indicates that both FPGAs have been un-configured.
Diamond will then load and run the application. The SMT365’s DONE LED will
extinguish.
The first part of the application is to draw the 4 output windows which will contain
the sampled ADC data. These windows can be positioned anywhere on screen.
The program will then configure the SMT356’s FPGA; its DONE LED will extinguish.
The screen should look similar to;