Sundance SMT8056 - Manual (Page 4)

1 Introduction
The SMT8056 is a demonstration system showing how the SMT356 (ADC module)
can be operated with the SMT365 (DSP module) using 3L/Diamond.
The documented example source code shows the necessary steps and functions to
call within a Diamond application.
The example acquires data from 4 input channels and displays these graphically.
2 Setup
2.1 Equipment Needed
SMT356 8 channel ADC module.
SMT365 DSP module.
SMT310Q TIM carrier board.
FMS ComPort Cable
SHB Cable
SMT517
SHB to SDB adapter.
3L/Diamond
2.2 Supplied Software
Demo356_365.c Main example source code.
Demo356_365.app Diamond executable.
Demo356_365.cfg Configuration file.
Display.c, Display.h Supplementary source and header files.
graph3l.h, graph3l.lib
makefile
Project makefile.
v-top.mcs SMT356 FPGA configuration file.
Distribution A folder containing necessary DLL files.
2.3 System Configuration - Software
The DLL files from within the distribution folder should be copied to the
WINDOWS\SYSTEM32 directory. They may already be present.
The remainder of the files should be copied into a single folder.
If only the executable is needed, then this must be accompanied by the v-top.mcs
file also.