4 system configuration – hardware, System configuration – hardware – Sundance SMT8056 User Manual

Page 5

Text mode
Original mode

2.4 System Configuration – Hardware

The SMT365 DSP module should be placed in site 1 of the SMT310Q. This module
should be secured using both mounting screws (or nuts depending upon SMT310Q
configuration).
The SMT356 ADC module should be placed in site 2 of the SMT310Q. This module
should be secured using both mounting screws (or nuts depending upon SMT310Q
configuration).

An FMS ComPort cable must be connected between T1C0 and T2C3. Note that one
end of the cable should show the silver pins, and the other end should show the
blue plastic.