Sundance SMT8090 - Manual (Page 5)

Version 0.9 Page 5 of 10 SMT8090 User Manual
Outline description.
The SMT8090 is a dual-C6713 based module (SMT374) combined with a dual high-
speed ADC module (SMT390).
SMT374 characteristics:
⇒ Dual TMS320C6713 processor running at 225MHz
⇒ Six 20MB/s communication ports (comm.-ports)
⇒ 128MBytes of SDRAM (100MHz)
⇒ 8MByte Flash ROM for boot code and FPGA programming
⇒ Global expansion connector
⇒ General purpose I/O connector
⇒ High bandwidth data I/O via 2 Sundance High-speed Buses (SHB).
SMT390 characteristics:
⇒ Two 12-bit ADCs ( AD9430-210 ) sampling at up to 210MHz,
⇒ Two Sundance High-speed Bus (SHB) connectors,
⇒ Two 4-channel Rocket Serial Link ( RSL ) connector – 2.5Gbits/second each,
⇒ Two 20 MegaByte/s communication ports,
⇒ Low-jitter on-board system clock,
⇒ Xilinx Virtex-II Pro FPGA,
⇒ 50-Ohm terminated analogue inputs and outputs, external triggers and
clocks via MMCX (Huber and Suhner) connectors,
⇒ User defined pins for external connections,
⇒ Compatible with a wide range of Sundance SHB modules,
⇒ TIM standard compatible.
The SMT8090 is a demonstration software for the evaluation of the SMT374 and
SMT390 modules. It can be used for prototyping 3G (3
rd generation) systems and
high-speed data acquisition system with or without digital processor. This document
is an installation guide for the SMT8090 demonstration system.
The SMT8090 application gets the DSP on the SMT374 to configure the SMT390
FPGA and control clock frequencies, clock routings, data format and data capture.
The DSP grabs data from both channels and stores them into a file, which can be
read by a Matlab application for data displaying and FFT processing.